Your water heater, installed in Stockton for a flat $800
We only do water heaters. A licensed installer swaps your tank to code for a flat $800. The heater itself is your choice: we can supply it for you, or you buy it and we tell you exactly which one to get. Every part and fee is priced up front.
The label on the side of your heater tells us the size, fuel and age. A photo of it is enough for us to tell you which heater to buy.
No hot water or a leak right now? Call, and we’ll tell you if it’s a repair or a replacement.
Call (209) 284-5371Repair or replace: where the problem is decides it
Most no-hot-water calls are a failed part, not a dead tank. Yellow markers are usually repairs. Red rings mean the tank itself is wearing out.
- 1
Anode rod
Rusty or smelly hot water. A sacrificial rod that takes the rust so the tank doesn't. Often replaceable if the tank is still sound.
- 2
Dip tube
Water turns lukewarm fast. Sends cold water to the bottom of the tank. A cracked one is a cheap fix.
- 3
Relief valve
Drips or hisses. The safety valve. We replace it and check the pressure behind the problem.
- 4
Gas control valve and thermostat
No heat, or the pilot won't stay lit. On electric heaters this is the heating elements and thermostats. Usually a repair.
- 5
Burner and flue
Soot, a scorched smell, a pilot that blows out. A safety item. Turn the heater off and call us.
- 6
Sediment on the tank floor
Rumbling or popping while it heats. A flush clears light buildup. On a tank over about 10 years old, heavy buildup usually means replacement.
- 7
Drain valve
A slow drip at the bottom. Replaceable without touching the tank.
- 8
Tank wall
Water coming from the body of the tank. A leaking tank can't be patched. This is a replacement, and sooner is better.
What you pay
Prices are for homes in Stockton and nearby. The written quote is the price you pay.
| Job | Price | What’s included |
|---|---|---|
| Tank replacement | $800 flat installheater supplied or you buy it | Labor to remove the old heater and set the new one to code. The parts kit ($175 electric, $225 gas) and the permit are priced on the pricing page. |
| Repair | $800 or lessquoted after diagnosis | We find the cause, tell you what it is, and give you a price before we fix it. |
| Tankless | Quoted per home | Gas line, venting and electrical needs change the scope, so we look at the setup first. |
Option A — we supply the heater. We bring the right unit and register the warranty for a flat $125 sourcing fee, so a standard replacement runs from about $1,900 all-in.
Option B — you buy the heater. A $650 gas heater plus $800 install, the $225 gas kit and about $100 for the permit comes to about $1,775. See every line.
How a replacement goes
- 1
You call or text
Send a photo of the label on your heater if you can. We ask where it sits and what you’ve noticed.
- 2
We sort out the heater
From your setup and a photo of the label, we recommend the right size and fuel. Then it’s your choice: we supply the heater for you, or you buy it yourself and we tell you exactly which one to get. Either way, we set the install day.
- 3
We swap the tank
Installation is $800, plus the parts kit and permit. The installer sets the new heater to code: seismic straps, relief valve line, venting and gas or electrical connections, then tests for leaks.
Where we work
Based in Stockton, we cover Lodi, Tracy, Manteca, Lathrop, Ripon and Mountain House, and the towns in between.
FAQ
How much does a water heater replacement cost in Stockton?
Our installation is a flat $800. On top of that you pay for the heater you buy (usually $500 to $1,200 for a standard tank), our parts kit ($175 electric, $225 gas) and the permit at cost. Most homes land between about $1,550 and $2,400 all in. Every line is listed on the pricing page.
Do I have to buy the heater myself?
No. You have two options: we can supply the right heater for you, or you buy it yourself and we tell you exactly which size, fuel type and model to get so it fits. Either way, send a photo of the label on your current heater and we’ll tell you what you need.
Do I need a permit to replace a water heater in California?
Yes. Replacing a water heater generally needs a permit and an inspection, and the work must meet code for seismic strapping, the relief valve drain line, venting and gas connections. Our licensed installer pulls the permit, and the permit fee is passed through at cost.
What does a repair cost?
We diagnose first, then give you a written price before we fix anything. Our repairs are $800 or less. If the honest answer is that the tank is finished, we'll say so and quote a replacement.
Can you install a tankless water heater?
Yes. Tankless units often need a larger gas line, new venting or electrical work, so we quote each home separately after seeing the existing setup.
Not sure if it needs a repair or a new tank?
Call or text. Send a photo of the label on the side of your heater and we'll tell you what we'd do.